Age MD12-125 Non-Ferrous 12"X120t 1" Bore BRE2K_MT458

Product details:

Non-Ferrous Saw Blade, 12"x 120Teeth, 1" Bore Thin Walled Saw Blades -- Designed specifically for cutting relatively thin-walled aluminum and non-ferrous extrusions and frames. Use a coolant or blade wax and clamp down the work piece when cutting non-ferrous metals. Features: Carbide Tipped TCG (Triple Chip Grind) Pistorius, CTD *** Warning: NEVER attempt to cut ferrous metals (steel, iron, etc.) with these saw blades. Non-Ferrous blade is not to be used on multi-purpose cut-off saws or gas power saws, unless saw has a guard that covers both the upper half an d the lower half of the blade completely. The guard must extend to the lowest point of the cutting teeth on the bottom of the blade. Consult machine owner’s manual and follow all instructions and safety procedures - including wearing safety goggles at all times while working with this blade. NOTE: Due to the rough applications for which these blades may be used, they are not guaranteed. **** Specifications: Tool No. MD12-125 Diameter 12" Teeth 120 Kerf .126" (3.2mm) Plate 0.100" (2.5mm) Hook Angle -5° Bore 1"